The SDA 2175 is a high-performance power amplifier designed without compromise. It can act as a controllable amplifier in Lyngdorf systems or as a power amplifier for conventional pre-amplifiers. The SDA 2175 is not your regular class D power amplifier. The output stage uses Pulse Width Modulation with a patented switch speed optimization technology. This ensures a low and linear natural distortion, and an unmatchable performance is achieved by using less feedback compared to typical Class D amplifiers.
PARAMETER VALUE NOTE Output power, 4 ohms 2 x 375 Watt 1KHz, 0.1% THD+N Output power, 8 ohms 2 x 200 Watt 1KHz, 0.1% THD+N Nominal load impedance 4 - 8 Ohms Frequency response 0.3Hz-33KHz -3dB points, 8ohms load. Frequency response 20Hz-20KHz -0dB/+0.2dB, 8ohms load Output impedance 0.035 Ohms 20Hz-1KHz Output impedance 0.4 Ohms 20KHz THD+N 0.004% @1W/8 ohms A-wgt. THD+N 0.006% @1 W/4 ohms A-wgt. THD+N 0.01% @100 W/8 ohms A-wgt. THD+N 0.07% @300 W/4 ohms A-wgt. S/N ratio 117dB A-wgt. Ref. 200 /8 ohms Dynamic range A-wgt. Ref. 200 W/8 ohms Channel separation 84 dB 1 KHz, 200 W/8 ohms Peak output current +/-40A Mains voltage range 100-120V AC, 50-60Hz 115 V version Mains voltage range 200-240V AC, 50-60Hz 230 V version Power consumption 1.5 W Standby mode Power consumption 35 W Operate mode, no output Power consumption 116 W 2 x 37.5 W / 4 Ohms Power consumption 820 W 2 x 300 W / 4 Ohms Width 450 mm / 17.72in Depth 355 mm / 13.98in Incl. loudspeaker connectors Height 100 mm / 3.94in Including feet Net weight 13 Kg / 28.6 lb
מחיר 2500שח 054-7646500
קבצים מצורפים: |
|
|
נערך לאחרונה על ידי lenagen בתאריך 19/07/20 17:36, נערך פעם אחת בסך הכל.
|